Table of Content

The page provides a guide on how to connect a robot to the internet via Wi-Fi. It includes steps such as powering on the robot, accessing the router, connecting to a Wi-Fi network, and verifying the connection. The guide features images and specific instructions for each step, making it easy to follow. Whether you're setting up a robot for the first time or troubleshooting a connection, this guide offers a comprehensive walkthrough.

Step 1: Powering on the Robot:

There is main power switch on the front of the robot which would allow you to turn on the power for the entire system.

Step 2: Getting the robot connected to internet

The Router on the robot can connect to both cellular and wifi and act as a client and will create its own subnet (192.168.42.x).

Accessing Router:

1. Once the ETS is on the router on it should work as an Access point and broadcast a WIFI named from your robot.

<aside> 💡 Please connect the computer to this wifi with password provided by InDro Robotics

</aside>

1. You would not have internet, but you would be able to access the router’s configuration page.
2. Please open any web browser and direct to http://192.168.42.1 and follow the steps below to connect your router to Wi-Fi.

<aside> 💡 Password: indr0.com

</aside>

Step 3: Connect to Wi-Fi

In the navigation bar, select "WIFI Hotspot" > "Hotspot Management" and scroll down to the "Network Available" section.

• Click on ADD TO LIST for the wifi network you want to connect.

<aside> 💡 Select your available Wi-Fi and enter correct password of your Wi-Fi. Below is the example of L5Office.

</aside>