The picture is only used to illustrate the placement of parts, please refer to the received content.
The accessories of different models will be different, please refer to the actual model.
https://www.youtube.com/watch?v=m6-n51A3dao
Place the box face up on a flat surface, then open the upper box. Lift the robot out of the box by using the strap and remove the accessories from the box in order. After learning how to use the robot correctly, place the quadruped robot flat on a level surface and prepare it for power-up.
Preparation for packing: Rotate the legs of the quadruped robot to the position shown in the picture (rear leg retracted step: rotate the rear leg hip motors so that the rear thighs are placed in the position as the picture shows, and at the same time retract the rear lower legs to the position shown in the picture.
After completing the preparatory work for packing, load the quadruped robot into the lower box in the direction shown in the picture (pay attention to the head of the quadruped robot to be stuck into the head placement in the process). After the quadruped robot is loaded, put the battery and charger that come with the shipment into the corresponding positions in the transport box to ensure that none of the above parts will fall Installing to the battery interface and buckle. When you hear a "click" sound, the battery pack installation is complete.