External Dimension Diagram

Top Expansion Bracket Dimensions Diagram

Use and operation

Inspection

• Chassis Status Check:Inspect the chassis for any visible abnormalities. If any issues are found, please contact after-sales support.
• Initial Use Confirmation:Check the rear electrical panel and ensure the Q2 (Power Switch) is in the released state. If it is pressed, press and release it again to return it to the released state.

Startup Procedure

• Power On:Press the power switch (Q2) on the rear electrical panel. If functioning normally, the power indicator light will turn on, and the voltage display will show the current battery voltage.
• Battery Voltage Check:
• Normal voltage range: 60–80 V
• If the voltage drops below 55 V, the BUNKER PRO 2.0 may not operate properly.

Shutdown Procedure

• Press the power switch to cut off the power supply.

Remote Control Operation

• After powering on the BUNKER PRO 2.0, turn on the remote controller.
• Switch to remote control mode to control the movement of the robot platform using the remote.