This section mainly introduces the basic operation and use of TRACER MINI platform, and how to carry out secondary development of car body through external CAN port and CAN bus protocol.

Table of Contents

Use and Operation.

1. Check

• Check the car body status. Check whether the car body is obviously abnormal; If yes, please contact after-sales support.

2. Boot up

• Click the button switch (Q3 in the electrical panel), under normal circumstances, the voltmeter is.
• The battery voltage is often displayed, and the headlight is on normally.

3. Disable operation

• Click the button switch to cut off the power supply.

4. Basic operation process of remote control

• After the machine chassis is moved by the normal start TRACER MINI, start the remote controller and select the control mode as the remote-control mode, then the movement of the TRACER MINI platform can be controlled by the remote controller.

Charging

TRACER MINI product is equipped with a 10A charger by default, which can meet the changing needs of customers.

Please. The specific charging procedure is as follows:

• Make sure that the TRACER MINI chassis is in the shutdown state. Before charging, please make sure that Q3 (button switch) in the rear electrical control panel is in the off state.
• Insert the plug of the charger into the Q4 charging interface in the electric control panel of the rear of the car.
• Connect the charger to the power supply and turn on the charger switch to enter the charging state.
• When charging normally, there is no indicator light on the chassis. For more information, see the charger indicator light.

Home Page: Tracer Mini

Next Page: CAN