This page provides a checklist and instructions for operating the RANGER mobile platform, focusing on checking its status, powering on and off, charging, and battery replacement procedures. It emphasizes the importance of checking for abnormalities before use and provides guidance on operating the emergency stop switch. Additionally, it outlines the process for charging the battery, including voltage checks and connecting the charger. Furthermore, it explains the procedure for replacing the battery when necessary, highlighting the accessibility of the battery panel on the right side of the RANGER for quick replacement during operation.

Table of Contents

Check

• Check the RANGER status.
• Check whether there is any obvious abnormality in the RANGER; if so, please contact after-sales support.
• When using it for the first time, check whether the power switch in the rear electrical panel is pressed, if pressed, please press it, and then release it. At this time, the power switch is released, and the RANGER is powered off .

Power on and off

The switch marked with "STOP" at the rear of the RANGER is an emergency stop switch. Pressing it will stop the RANGER immediately and turning it clockwise will exit the emergency stop mode.

Charge

Check the battery voltage. The normal voltage range is 45-54V. If the battery voltage is too low, please charge it in time. This product is equipped with a 20A charger by default. Insert the plug of the charger into the charging socket on the back of the chassis, connect the charger to the power supply, and turn on the switch on the charger to enter the charging state.

Battery replacement:

RANGER itself is equipped with a 48v24ah battery. During operation, when the battery power is too low, we can open the battery panel on the right side to quickly replace the battery.

Home Page: Ranger

Next Page: CAN Data