$\color{white}\colorbox{FE9227}{Congratulations, You Did It! A Journey Completed!}$ $$▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ 100%

Welcome to our page! Here, we provide a simple guide to help you set your LIMO device back to its factory settings. It's important to note that the instructions provided on this page are specifically meant for those who want to reset their LIMO device. If you follow these steps, it will restore your LIMO to its original configuration

Table of Contents

<aside> ⛔ ONLY FOLLOW THE INSTRUCTIONS ON THIS PAGE IF YOU WISH TO RESET YOUR LIMO TO FACTORY SETTINGS.

</aside>

Overview Video

re-burnLIMO1.mp4

  1. Unscrew the 4 screws placed near Jetson nano.

Untitled

  1. Remove the SD card from LIMO.

Untitled

  1. Insert the SD card in to SD card reader.
  2. Now follow the instruction below to flash it.

<aside> ⛔ It is recommended to flash SD card in Linux environment.

</aside>

Download and install balenaetcher

  1. Download and install balenaetcher on a PC; download link: https://www.balena.io/etcher/; download different versions according to the operating system and architecture of the PC.

Download the image to be burned

<aside> 📒 UnZip this file after downloading; extension should be .img

</aside>

  1. Here is an example of the official image provided by our company. Use Baidu cloud disk to download the image, and the download link is:https://drive.google.com/file/d/16uIAMiD4ziUZyTxlAcFLeDGFdeaSvzlU/view?usp=sharing

Instructions on software usage