Welcome to the detailed guide on the Unitree B1 remote control, an integral component of the B1 remote control module. This chapter provides comprehensive information about the remote control's components, technical specifications, calibration process, power management, charging procedure, and basic operation for controlling the B1 quadruped robot.

Table of Contents

Introduction

The remote control is part of the B1 remote control module, and the remote-control handle has an installed digital transmission module and a Bluetooth module. The robot dog communicates with the remote control through the data transmission module to achieve one-to-one correspondence, and remote control can be connected when the robot is on. The robot dog can be manipulated to achieve stable and full control of 3-axis posture and 3-axis position when standing. The users can manipulate the robot to move forward and backward, move left and right, spin turn and walk under certain rules (straight line, circle, rectangle), etc. on flat ground, and can even climb or walk downstairs and slopes. The remote-control handle adopts an easy holding design, which makes the structure conform with ergonomic and feels more comfortable.

Parts Name

Untitled

  1. Right Rocker
  2. Left Rocker
  3. Key L1/L2
  4. Key R1/R2
  5. Type C charging Interface Type C
  6. Data Transmission Signal Light
  7. Left Key
  8. Power Connect Indicator
  9. F1 Left Rocker Calibration Key
  10. Select
  11. Charging Status Indicator
  12. Power Indicator Light
  13. Power Button
  14. Data Transmission Indicator Light
  15. F3 Right Rocker calibration Key