Welcome to the Battery Pack Safe Operation Guide for the Unitree B1 quadruped robot. This comprehensive guide is designed to ensure the proper and safe use, charging, and storage of battery packs associated with the robot. Failure to adhere to these safety instructions may result in fire, property damage, or personal injury. Please carefully read and follow the guidelines outlined below to guarantee a secure and efficient experience with the battery packs.
Table of Contents
Battery Pack Safe Operation Guide
Improper use, charging or storage of battery packs may result in fire or property and personal injury. Be sure to use the battery pack in accordance with the safety instructions below.
Use
- Make sure the battery pack has enough battery before each use.
- When using, moving or charging, please be careful with the battery and charging plug to avoid being damaged by external force.
- When the power of the battery pack is lower than two bars, stop using the robot as soon as possible, replace the battery pack with a new one or charge the battery pack.
- It is normal for a battery that has just been used or charged to generate heat.
- It is forbidden to contact the battery pack with any liquid. Do not immerse the battery pack in the liquid or wet Short circuit and decomposition reactions may occur when the inside of the battery pack meets water, which may lead to spontaneous combustion of the battery pack or even explosion.
- It is forbidden to use battery packs not officially provided by Unitree Robotics. If the users need to replace it, please go to the official website of Unitree Robotics for relevant purchase Unitree Robotics is not responsible for battery pack accidents, operation failures and machine damage caused using battery packs not officially provided by Unitree Robotics.
- It is forbidden to use battery packs with damaged packages and shells.
- Before installing or unplugging the battery pack from the robot, please keep the power of the battery pack off. Do not plug and unplug the battery pack when the power supply of the battery pack is turned on, otherwise the power supply or the robot may be damaged.
- The battery packs should be used at an ambient temperature of -5°C-55°C. If the temperature is too high (higher than 60°C), the battery packs may catch fire or even explode. If the temperature is too low (lower than -10°C), the life span of the battery pack will be seriously damaged.
- It is forbidden to use the battery pack in strong magnetic field or electrostatic Otherwise, the battery packs protection board will fail, resulting in the failure of the battery packs and the robot.
- It is forbidden to disassemble or puncture the battery pack in any way.
- If the battery pack is seriously impacted by external forces, it cannot be used again until it is delivered to Unitree Technology for official inspection.
- If the battery pack is on fire, use solid fire extinguishers. It is recommended to use fire extinguishers in the following order: sand, fire blanket, dry powder, and carbon dioxide extinguishers.
- Do not place the battery pack in the pressure cooker or microwave over.
- Do not place the battery pack on the conductor plan.
- Do not use any conductive material (such as wire or other metal objects) to short the positive and negative terminals of the battery pack.