The information in this manual does not include the design, installation and operation of a complete robot application, nor does it contain all peripheral equipment that may aff ect the safety of this complete system. The design and use of the complete system must meet the safety requirements established in the standards and specifications of the country where the robot is installed.

TRACER MINI integrators and end customers have the responsibility to ensure compliance with the practical laws and regulations of relevant countries, ensure that there are no major risks in the complete robot application instance. This includes but is not limited to the following:

Table of Contents

Effectiveness and responsibility

• Make a risk assessment for the complete robot system.
• Connect additional safety equipment of other machinery defined by risk assessment.
• Confirm that the design and installation of peripheral equipment including software and hardware systems of the entire robot system are correct.
• The robot does not have a complete autonomous mobile robot with automatic anti-collision, anti-drop, biological approach warning and other related security functions, but is not limited to the above description. The related functions require the integrator and end customers to follow the relevant regulations and practical laws and regulations for safety assessment, to ensure that the developed robot does not have any major risks and potential safety hazards in practical application.
• Collect all documents in technical documents: including risk assessment and this manual.

Environment

• For the first time, please read this manual carefully to understand the basic operation content and operation specifications.
• Remote control operation, choose relatively open area to use, the car itself is without any automatic obstacle avoidance sensor.
• Used at ambient temperatures of-10℃ ~ 45℃.
• If the vehicle does not have a separate IP protection level, the vehicle's waterproof and dustproof capabilities are ip22.

Check

• Make sure the power of each equipment is sufficient.
• Make sure there is no obvious abnormality in the vehicle.
• Check whether the battery of the remote controller is sufficient.

Operation

• Ensure that the surrounding area is relatively empty during remote control.
• Remote control within sight distance.
• The maximum load of the TRACERMINI is 50kg. When in use, ensure that the payload does not exceed 50kg.