The information in this manual does not include the design, installation and operation of a complete robotic application, nor does it include any peripherals that may affect the safety of this complete system. The design and use of this complete system requires compliance with the safety requirements established in the standards and specifications of the country where the robot is installed.

It is the responsibility of BUNKERMINI's integrators and end customers to ensure compliance with relevant specifications and effective laws and regulations, so as to ensure that there are no major hazards in the complete robot application example. This includes but is not limited to the following:

Table of Contents

Validity and Responsibility

• Make a risk assessment of the complete robot system.
• Link together the additional safety equipment for other machinery as defined by the risk assessment.
• Confirm that the design and installation of the peripherals of the complete robot system, including software and hardware systems, are accurate.
• This robot does not have relevant safety functions of a complete autonomous mobile robot, including but not limited to automatic anti-collision, anti-falling, biological approach warning, etc. These functions require integrators and end customers to conduct safety assessments in accordance with relevant specifications and effective laws and regulations, so as to ensure that the developed robot does not have any major dangers and safety hazards in practical applications.
• Gather all documents in the technical file: including the risk assessment and this manual.
• Be aware of possible safety risks before operating and using the equipment.

Environment

• When using it for the first time, please read this manual vehicle fully to understand the basic operation contents and operation specifications.
• For remote operation, choose a relatively open area for use, and the vehicle itself does not have any automatic obstacle avoidance sensors.
• Use in an ambient temperature of 0℃~40℃.
• If the vehicle does not have an individually customized IP protection level, the vehicle's waterproof and dustproof capabilities are IP67.

Inspection

• Make sure that each device has sufficient power.
• Make sure there is no obvious abnormality in the vehicle.
• Check that the remote control's batteries are fully charged.

Operation

• Make sure the surrounding area is relatively clear during operation.
• Remote control within sight range.