This module provides users with the function of configuring core parameters for network connections. By manually setting the device's network protocol and other relevant parameters, it enables the device to achieve network identity identification, route addressing, and domain name resolution, ensuring that the device can access the target network normally and conduct data communication with other devices or servers in the network.
After manually setting the ip address of the robotic arm, you can connect the robotic arm and the host computer via the Ethernet port. Ensuring that the host computer and the robotic arm are on the same network segment will enable successful communication between them.
This interface is used to configure the basic network parameters for the robotic arm to act as a Wi-Fi hotspot, enabling other devices(mobile devices)to connect to it via Wi-Fi and realize wireless data transmission and control functions.
<aside> <img src="/icons/home_orange.svg" alt="/icons/home_orange.svg" width="40px" />
Home Page: Nero Robot Arm
</aside>
<aside> <img src="/icons/arrow-right_orange.svg" alt="/icons/arrow-right_orange.svg" width="40px" />
Next Page: Upgrade
</aside>