<aside> 💡

Wifi connectivity is a one-time setup, unless you want to change the network!

</aside>

Steps to connect to Wi-Fi

Open the Wi-Fi Settings:
- Click on the Network icon in the system tray (top-right corner of the screen).
- Select Wi-Fi Settings or Settings > Wi-Fi.
Select a Network:
- A list of available Wi-Fi networks will appear.
- Click on the network you want to connect to.
Enter the Password:
- If the network is secured, a password prompt will appear.
- Enter the Wi-Fi password and click Connect.
Verify Connection:
- Once connected, the Wi-Fi icon will update to indicate an active connection.
- You can check connectivity by opening a web browser and visiting a website.

Setting up ZeroTier on Remote machine (your computer)

What is ZeroTier?

ZeroTier is a tool that helps connect devices over the internet as if they are on the same local network. It works like a virtual private network (VPN), but it’s easier to set up and use.

Why Do We Need It?

Remote Access: It allows you to access and control your robot from anywhere, even if your laptop and the robot are on different networks.

Easy Setup: You don’t have to deal with complicated networking settings like port forwarding or configuring firewalls.

Security: It keeps the communication between your devices encrypted and safe from outside interference. In your case, ZeroTier will let you control and interact with your robot remotely as if it were plugged directly into your laptop!

How ZeroTier Works?

Connect Devices: Install ZeroTier on your devices (your laptop)
join them to the same virtual network using a unique network ID.

<aside> 💡

Network ID of your Robot: -

</aside>
Secure Connection: Email to support@indrorobotics to get your laptop authorized and its done!

<aside> 💡

Detailed steps are here: ZeroTier for User

</aside>

Home Page: ‣

</aside>

Next Page: Software

</aside>